Preference Manager 2.0.2 released

We've just released Preference Manager 2.0.2, which is primarily a maintenance release but has a couple of small features too.

Preference Manager is an application for managing the preference files of Final Cut Studio. Preference files store user preferences and other settings, and can cause strange behavior if they become corrupt. Preference Manager allows you to trash, backup, restore and lock these files for maximum flexibility.

The main changes are:

• Better support for prior versions of FCP
  Preference Manager now supports all versions from Final Cut Pro 3 onwards.
• New icons to differentiate project-linked backups
  When you link a project to a backup, a linked chain symbol will now appear. Hovering over the icon will reveal the name of the project it is linked to. If the project does not exist, a red broken chain icon will appear.
• Selections in the Advanced dialog are now remembered when the application is closed
  A lot of people asked for this, so here it is. Also, when you launch Preference Manager for the first time, only preferences are selected in the Advanced dialog. Some people inadvertently deleted their button bars and window layouts because they didn't realize they were selected by default.
• Support for custom Compressor settings and destinations
  Preference Manager is now capable of backing up custom Compressor settings and destinations.

Preference Manager is completely free and is available here.

Compressor Repair 1.1.3 released

We've just released a quick maintenance update to Compressor Repair, bringing it up to version 1.1.3. This one improves Tiger compatibility and compatibility with foreign language versions of OS X.

Apple's Compressor relies heavily on the Qmaster service in order to work. Qmaster allows you to split rendering tasks across multiple machines in a render farm but it is still required even if you are only rendering on a single computer.

The link between the two is so important that if the Qmaster service fails to launch, Compressor will be unable to submit batches. Should this occur, Compressor Repair checks for problems that could be preventing Qmaster from operating correctly. It checks for missing files, incorrect permissions, an invalid hostname, and attempts to manually start the qmasterd process.

Compressor Repair remains completely free and is available here.

Preference Manager 2.0.1 released

We've just released Preference Manager 2.0.1 (if you're wondering what happened to 2.0.0, that was exclusive for FCP SuperMeet visitors).

Preference Manager is a utility that allows you to trash, lock, backup and restore your Final Cut Studio user preferences. Unlike other apps, it supports all applications in the Final Cut Studio suite, not just FCP. It is useful as a troubleshooting tool and as a simple means of transferring your preferences to another computer.

Version 2.0.x is a complete rewrite with a redesigned and improved interface. It was designed to be easier for casual users while still being useful for power users. So if you click Backup or Quick Trash in the Basic tab, this will just trash or backup all of your preferences, which is fine for most users.



People who want a bit more control can click on the Advanced tab, where they will have more precise control over what is trashed or backed up, and also have the option to lock files to prevent modification.

You can also assign categories to better distinguish backups. There are three categories - User, Project and Workflow. These categories are just different ways of representing the backups and have no bearing on the content stored in the file or the operation of Preference Manager - they're purely for organization (incidentally, I am open to suggestions for additional categories).

However, it is possible to optionally link a project to a Project-categorized backup. This doesn't just apply to FCP projects either - you can add Motion projects, Color projects, Compressor jobs, etc. Whenever you launch the project, the backup will automatically be restored before the application launches. This enables you to easily set scratch disks and other settings on a per-project basis (you must open the project file in the Finder - you can't click File > Open).

As these are major changes to the application, I would fully appreciate feedback on what works for you and what doesn't. Everyone uses the app in a slightly different way, so it'd be interesting to hear what would improve your particular workflow. Just reply to this post, use the feedback form at the bottom of the Preference Manager page, send us an email or contact us on Twitter.

Preference Manager remains completely free and can be downloaded here. If you are running version 1.0.7, you will need to download and install the update manually due to a bug with the updater in that particular version.

Incoming network connection dialogs keep appearing

Amazingly for an OS that markets itself as secure, the firewall in OS X is not switched on by default. So if you switch it to the recommended mode, "Set access for specific services and applications", OS X will prompt you to allow or deny incoming connections.



But sometimes that dialog will not go away! Certain applications such as QmasterStatusMenu.app and Batch Monitor.app cause the dialog to pop up every 5 seconds (or every 20 seconds if you ignore it) which gets annoying very quickly.

The reason for this is that applications like QmasterStatusMenu.app and Batch Monitor.app don't communicate on the same port each time. It is constantly changing, as this log excerpt shows:



This really confuses the very basic OS X firewall.

Some people have recommended switching the firewall off but I wouldn't recommend this. There's always a trade-off between security and convenience, but this trade-off is far too big. Instead, it is much better to just obtain a more advanced firewall.

I would recommend Little Snitch for this job. It gives you infinitely more options than the default firewall, lets you see where apps are sending data, doesn't bug you too often, and most importantly, it copes with applications that constantly change ports so those annoying 5-second popups go away.



The demo gives you full functionality for 3 hours, after which you just restart the firewall again. That's a lot better than popups every 5 seconds, but if 3 hours is too often, you can buy a single license for $29.99.

Just install Little Snitch, restart the computer and switch the default OS X firewall to "Allow all incoming connections". Little Snitch then takes over - you can now use Qmaster and be safe at the same time.

Compressor Repair 1.1.2 released

We've just released a minor update to Compressor Repair, bringing it up to version 1.1.2.

This update checks for a missing local hostname or computer name. This is a common reason for Compressor failure and can be fixed by entering a new name into the text field at the top of the Sharing dialog in System Preferences. Compressor Repair won't actually change the name but it lets you know it is missing and tell you how to change it. Why these names disappear unfortunately remains a mystery.

As always, it is completely free and is available here.

We also have several other tools and utilities in the Resources section of the site.

Compressor Repair 1.1.1 released

We've just released Compressor Repair 1.1.1. This is a minor release that automatically enables the Qmaster startup process if the user has disabled it.

I'd also like to make a point about compatibility. Compressor Repair is designed for Compressor 3. Not all features will work with versions below this - you will receive messages stating that certain files do not exist because they were not present in earlier versions.

However, many features do work on earlier versions so it is still recommended to try it before reinstalling.

Compressor Repair is completely free and is available here. For more of our applications, visit the Resources section of the site.

FCS Remover 2.0.7 released

FCS Remover 2.0.7 has just been released. This is a minor release to fix a couple of bugs that still remained from the changes added in 2.0.5.



FCS Remover is completely free and is available here. See the Resources section of this site for more software.

FCS Remover 2.0.6 released

Yesterday we released FCS Remover 2.0.5. This is a minor update to our Final Cut Studio uninstaller.

Changes:

• Feature: Remembers last window positions.


• Feature: Remembers last selected options.


• Feature: Preferences dialog.


• Feature: Trash Preferences option.


• Improvement: Improved Qmaster exit method.


• Feature: Command-line arguments (see user manual).


• Feature: Keyboard shortcuts - Space to select items, Cmd+A to Select All, Cmd+Shift+A to Select None.

FCS Remover is completely free and is available here. Check out our other software here.

Update 1/14/09: 2.0.5 was re-released as 2.0.6 to fix some bugs.

Compressor Repair 1.1.0 released

We've just released Compressor Repair 1.1.0 with the following changes:

• Enhancement: Improved Qmaster relaunch process


• Enhancement: Improved feedback when errors have been discovered


• Feature: Command-line functionality (see user manual)


• Feature: Now refreshes Qmaster icon in menu bar


• Bug fix: Fixed "file exists" error when trashing qmaster spool

Compressor Repair is completely free and is available here.

FCS Remover 2.0.4 released

We've just released FCS Remover 2.0.4. It's a maintenance release so there aren't any new features. This improves the window resizing code (thanks Andy) and now reports the application version when submitting an error. This is in response to several people reporting errors from earlier versions that had already been fixed in later ones. The bug reporter now prompts you to update older versions of FCS Remover before submitting a bug report in case the bug has been fixed in a later version, although you still have the option to submit the report regardless.



FCS Remover is a tool for removing Final Cut Studio, Final Cut Express and Final Cut Server. This is recommended practice when upgrading Final Cut Studio or for general troubleshooting. You can specify which elements to remove, and there are even built-in presets for common tasks. It works with Final Cut Studio 1 and 2, and Final Cut Studio 4 and above, and is compatible with Leopard and Tiger operating systems.

FCS Remover is completely free and is available here. We also have many other useful tools available here.